Eaw Festival Sound System for sale in Ontario, CA
Eaw sound system. Just the left and right stacks. 8 dual 18's and 8 dual 12's, I've always ran 3 tops per side. The tops come with the fly bars. No amps8- Sb5288- As660i (two backups, one tweeter is out)ARCHITECTURAL SPECIFICATIONSThe biamplified 3-way full range loudspeaker systems shall incorporate 2x 12-in LF transducers, a 10-in MF cone and a 1.4-in exit/44mm voice coil HF compression driver.The LF drivers shall be mounted in slanted baffles and sepa- rated to create a dipolar array. The MF driver shall be loaded into a midrange horn constructed of 3mm birch plywood backed with high density polyurethane foam. The HF driver shall be loaded on a constant directivity horn with a nomi- nal coverage pattern of 60° (h) x 45° (v). An internal pas- sive filter network shall provide fourth order acoustical cross- over and system equalization between the MF and HF sub- systems.System frequency response shall vary no more than ±3 dB from 70 Hz to 17 kHz measured on axis. The mid/high sec- tion shall produce a Sound Pressure Level (SPL) of 105 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 136.6 dB SPL on axis at 1 meter. The low frequency section shall produce a Sound Pressure Level (SPL) of 100 dB SPL on axis at 1 meter with a power input of 1 Watt, and shall be capable of producing a peak output of 135.0 dB SPL on axis at 1 meter. The mid/high section shall handle 360 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 Ohms. The low frequency section shall handle 800 Watts of amplifier power (AES Standard) and shall have a nominal impedance of 4 Ohms.The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of 15mm thickness void-free cross-grain- laminated Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in black polyurethane. Input connectors shall be 2x 2-terminal barrier strips. Eleven (11) 3/8"-16 threaded mounting/suspension points (3 on top, 2 each on bottom, back and sides) shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grill.The biamplified 3-way full range loudspeaker shall be the EAW model AS660i.
|
|
 |